Canfield named NAVAIR Supervisor of the Year for China Lake
News originally published by
DVIDS - GeorgiaHis team had packed gear built at China Lake into Pelican cases and stacked them on a pallet. Canfield watched the operators wrap it all for the aircraft that would carry it overseas. He calls the handshake one of the crowning moments of his career.
Naval Air Systems Command honored Canfield as its 2026 Supervisor of the Year for China Lake on Oct. 21. He was one of 11 site winners chosen from 258 nominations. NAVAIR has more than 3,000 supervisors.
He leads the Exploratory Development Lab, known as XDEV, at Naval Air Warfare Center Weapons Division. Its nine-person team builds prototypes for urgent warfighter needs on short timelines. Canfield supervises all nine and leads five more engineers on project teams beyond the lab.
Canfield called the award a great honor but said being singled out was hard to wrap his head around.
He would rather talk about the team.
"I'm actually a little embarrassed by the whole thing, honestly," he said.
Canfield came to NAWCWD in 2007 with an electrical engineering degree from Michigan State University. He worked on a small guided munition and helped start the Miniature Munitions Lab. That lab merged into XDEV about three years ago, and he became its lead.
XDEV's engineers cover mechanical, aerospace, systems, electrical and computer engineering, plus computer science. Since about 2012, the group has built mostly for Naval Special Warfare, or NSW.
One early job shows the stakes.
Troops on the ground overseas could not see what the unmanned aircraft above them saw. They got a voice description from the ground control station.
"They didn't know what was literally down the road," Canfield said.
His team built video kits for the Puma, ScanEagle and Blackjack unmanned aircraft. The kits sent encrypted video to a ruggedized computer on the ground and let troops control the camera turret and zoom in themselves.
Most XDEV projects take six months to a year. A few take weeks. The Blackjack ballast kits were one of those.
The Blackjack carries its mission gear in a payload bay in the center of its body. NSW switched its Blackjacks to a new payload bay, then found it had no way to ballast, or balance, the aircraft. Without ballast, the Blackjacks could not fly with the new bay.
XDEV had already solved that problem.
Its Skywalker project, an effort to launch a quadcopter from a Blackjack in flight, used the same bay and needed ballast too. Canfield, mechanical engineer Nick McGaha and Shawn McGann received a 2019 NAWCWD Warfighter Support Award as the Skywalker Team. Canfield said the award recognized the ballast kits that came out of that work.
At a Skywalker flight test, an NSW leader asked to use the team's system. XDEV reworked it to mount in four spots in the bay, with a standard interface for two types of payload weights. Canfield said the team delivered close to 50 kits in two or three weeks.
"There's no software. There's no electronics, but it helped get NSW out of a bind," he said.
The lab's four large 3D printers serve more than XDEV. They run about 3,000 to 4,000 hours a year, including work for the solid fuel ramjet team and other China Lake groups.
A part 4 feet long will not fit in the older printers, Canfield said. Until the lab got a bigger printer, engineers had to split the design into two, three or four pieces, then work out how to keep it strong and fasten it back together.
The lab asked for a large-format printer this year. The first request was denied because local fabrication capabilities already existed. At Canfield's request, McGann compiled the cost data. It showed outside fabrication would cost about 12 times more than buying the printer.
Canfield took the data to leadership, which reversed the denial.
The new printer's build area measures about 40 inches by 24 inches by 24 inches. Now the team prints a part at the size it needs to be, with no splitting or fastening. Next, it plans to print an entire wing section for another NSW aircraft project as one piece.
"If there's red tape in our way, he just handles it so we can keep working," said McGaha, who works on Canfield's team. "Then he trusts us to do our thing."
Trust, to Canfield, means not micromanaging.
"I have amazing people and people I can trust, people I can give a high-level requirement to and say go do this. Go figure it out," he said.
That includes room to get it wrong.
When an engineer's mistakes on a task cost XDEV time and schedule, Canfield and the team's subject matter experts mentored through the fix.
"They will never make those mistakes again because they were able to make them for themselves," Canfield said.
Hard conversations come with the job.
Canfield calls himself a nice guy. Telling someone face to face that they need to improve does not come easily, he said.
As a new supervisor, he put those conversations off. He said that is the biggest thing he would change. Skipping them is "a disservice not only to the person, but ... to the whole organization," he said.
McGaha has sat in on those talks. "He doesn't dodge the hard conversations. He'd rather put in the time to help you get better than just let it slide," McGaha said.
Canfield gives praise when it's earned. When someone misses the mark, he says so.
"You need to step up your game a little bit because I think people appreciate that too," Canfield said.
He also calls himself a good listener.
Weekly "heartbeat" meetings set project plans and taskings, and Canfield takes on tasks alongside the team. Each meeting ends with a trip around the room so every engineer, including the quiet ones, gets a turn to speak.
Canfield learned hard work at home in Williamston, Michigan, near Lansing. His father drove semis between General Motors plants.
"He worked 60 hours a week every week for as long as I can remember, and then still on the weekends would find time to help fix the neighbor's car," Canfield said.
He still tries to live up to that example.
He never has to push his engineers to work hard, he said. Instead, he reminds them what else matters.
"Wait, slow down. This is important, but so is your family," he said.
His team gave him a perfect 5 out of 5 on "My supervisor cares about me" in the annual Gallup survey. Canfield said he tries to show people he cares, at work and outside it.
At the Oct. 21 ceremony, Steve Cricchi, NAVAIR's deputy commander, said an average manager burns people out to hit a milestone. This year's winners, he said, do the opposite.
"Each of you is achieving exceptional outcomes for the fleet through your people, with your people not at their expense," Cricchi said.
Canfield said he is not sure how the lab got so lucky with its engineers, the technicians it works with and the team that flies its aircraft.
Back at the test site, Canfield knew what the operator meant.
"What he was getting at is I'm going overseas in a week. And I'm going to use your stuff."
Legal Disclaimer:
EIN Presswire provides this news content "as is" without warranty of any kind. We do not accept any responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you have any complaints or copyright issues related to this article, kindly contact the author above.